Automatic Cutter Alignment Equipmet Model CR-555M II – This equipment measures and corrects the web cutting position. When the measured discrepancy of the cutting position exceeds the set value, notification is issued by way of an alarm and other means. Options include PIV control circuit.
- Easy-to-read waveform displaySignals from the scanning head can be shown on the 5.7-inch color liquid crystal display.
Display of signals for one pitch is possible, making designation of the control gate position easier.
- Operation is possible on the touch panelSettings are made on the same screen, after switching from the waveform setting screen.
- It is possible to select from two settings to suit the installation location.It is possible to choose from the integral main unit/display type and the separately installed display type.
Specifications and capacities
|Correction mechanism||Compensator roller or differential controlRotary cutter control|
|Detection mechanism||scanning head|
|Detection accuracy||+/-0.01 mm|
|Range of fine adjustment||+/-9.9 mm|
|Colors detected on pitch||visually discernible practical colors|
|Warning set-up value||variable between 0.1 mm and 9.9 mm|
|Power source||AC100V/200V +/- 10% 1φ 50/60 Hz 1 kVA|
|Compatible environment||Temperature: -10°C to +40°CHumidity: 20% to 80%RH (no condensation)|