Automatic Register Controller SKT-001 has been newly developed for easier operation and suitable AC servo motor control by improving DT-950MⅡ now being highly reputed.
- Clear display by a TFT color touch monitor. (15-inch)
- USB port for mouse operation.
Instructions for guidance are prepared in Japanese, English, and Chinese.(language can be switched on display.)
- Automatic gate set-up function. (applicable to forward and reverse marks.)
- An optimum correction quantity can be set by “one-touch” operation by the conditions of printing materials.
- Prevention of wrong correction by a fail-safe function.
- Optical fiber type scanning head is mounted as the standard equipment.
- Monitor uses ultrasonic touch monitor with high bright visibility and has superior durability and scratch resistance.
- Individual operation of the A system and B system is possible when used as a split printing.
- Can be used with up to 16 colors
Specifications and capacities
|Applicable printer||Web-fed gravure rotary press|
|Correction compensation function||Length : Compensator roll correction system
(applicable for AC servo motor)
Sidelay : Lateral move system by using cylinders
(Use a single-phase synchronous register motor)
|Detection accuracy||Length : ±0.01 mm
Sidelay : ±0.01 mm
|Applicable printing speed||10 to 1000 m/min (CY1000mm)|
|Correction speed||Length : Standard 1 mm/sec (on web)
Sidelay : Standard 0.4 to 0.6 mm/sec
(Cylinder move quantity)
|Fine adjustment range||±9.99 mm in each direction|
|Detection color||A practical color visible against white or black.|
|Alarm setting range||0.1 to 0.9mm variable|
|Power supply||AC100/200~240 V ±10% 1ø 50/60 Hz 1KVA|
|Environmental Condition||Temperature : 0 to 40 degrees (Touch Monitor 5 to 35 degrees)
Humidity : 25〜80 %RH (no condensation)
|Scanning head (paper/transparent film type)||number of channels pieces (printing units -1)
Optical fiber type :
Ff head (Vertical and horizontal register mark
arrangement correspond to both.), Optical fiber cable , junction box
LED type : HW head or RB head , junction cord , junction box
|Pulse generator||(number of channels) cords|
|Scanning head relay box||(number of channels) units|
|Pulse generator||Line shaft drive machine : 1 piece (2 pieces in case of a split type)
Sectional drive (compensator-less) machine :