Automatic Register Controller SKT-001

Automatic Register Controller SKT-001 has been newly developed for easier operation and suitable AC servo motor control by improving DT-950MⅡ now being highly reputed.

Automatic Register Controller SKT-001

Product features

  1. Clear display by a TFT color touch monitor. (15-inch)
  2. USB port for mouse operation.
    Instructions for guidance are prepared in Japanese, English, and Chinese.(language can be switched on display.)
  3. Automatic gate set-up function. (applicable to forward and reverse marks.)
  4. An optimum correction quantity can be set by “one-touch” operation by the conditions of printing materials.
  5. Prevention of wrong correction by a fail-safe function.
  6. Optical fiber type scanning head is mounted as the standard equipment.
  7. Monitor uses ultrasonic touch monitor with high bright visibility and has superior durability and scratch resistance.
  8. Individual operation of the A system and B system is possible when used as a split printing.
  9. Can be used with up to 16 colors

Specifications and capacities

Applicable printerWeb-fed gravure rotary press
Correction compensation functionLength : Compensator roll correction system
(applicable for AC servo motor)
Sidelay : Lateral move system by using cylinders
(Use a single-phase synchronous register motor)
Detection accuracyLength : ±0.01 mm
Sidelay : ±0.01 mm
Applicable printing speed10 to 1000 m/min (CY1000mm)
Correction speedLength : Standard 1 mm/sec (on web)
Sidelay : Standard 0.4 to 0.6 mm/sec
(Cylinder move quantity)
Fine adjustment range±9.99 mm in each direction
Detection colorA practical color visible against white or black.
Alarm setting range0.1 to 0.9mm variable
Power supplyAC100/200~240 V ±10% 1ø 50/60 Hz 1KVA
Environmental ConditionTemperature : 0 to 40 degrees (Touch Monitor 5 to 35 degrees)
Humidity : 25〜80 %RH (no condensation)


Main body1unit
Scanning head (paper/transparent film type)number of channels pieces (printing units -1)
Optical fiber type :
Ff head (Vertical and horizontal register mark
arrangement correspond to both.), Optical fiber cable , junction box
LED type : HW head or RB head , junction cord , junction box
Pulse generator(number of channels) cords
Scanning head relay box(number of channels) units
Pulse generatorLine shaft drive machine : 1 piece (2 pieces in case of a split type)
Sectional drive (compensator-less) machine :

error: Content is protected !!